#Os x image capture manual
#Os x image capture free

The larger the image, the longer the process will be.

The creation process will vary in completion time depending on several factors (Figure H), including speed of the computer, bandwidth between the master HDD and technician's computer, and how large the image is that's to be created.

If prompted, enter admin credentials to start the image creation process ( Figure G).

However, if not using OS X Server, than any location is suitable. By default, OS X Server requires the NetBootSP0 directory located at: /Library/NetBoot.

Next, select a destination for the image to be saved.

Click the button to Agree to Apple's EULA and proceed with the creation process ( Figure E).

Once completed, click the Create button ( Figure D).

While optional, it is a good practice to specify certain details, such as creation date, application or department use, etc. On the next page, enter in the details for the Image Settings so that it's identifiable to IT.Select the radio button next to NetRestore Image, since that is the image type being created, and then click the Continue button ( Figure C).It needs be the externally connected drive from the master computer ( Figure B). Select the disk that will serve as the source of the NetRestore image from the drop-down menu.Launch System Image Utility.app by going to /System/Library/CoreServices/Applications ( Figure A).Once this is done, the drive on the master station should appear as an external device on the technician station. Depending on the method chosen-targeting or external USB HDD-the objective will be to connect the master station hard drive to the technician's computer as an external device.

#Os x image capture manual

This is imperative, as anything that is not configured pre-capture will require manual correction post-deployment. Note: If the computer designated as the master node is not yet configured, do not proceed any further until the master station is configured exactly as it needs to be prior to capturing a deployment image. With these requirements out of the way, let's proceed to the step-by-step creation process.

Apple computer running OS X Server 10.7+ (Optional required if deploying NetRestore image via NetInstall service).

FireWire 400/800 or Thunderbolt cable (Optional only required if targeting from technician to master station for image creation).

External USB HDD (Optional only required if connecting master computer's HDD externally to technician's computer for image creation).

#Os x image capture free

Apple technician computer running OS X 10.7+ (with enough free storage space to save completed image from master computer).However, do not configure directory bindings, because that should not be done until after the image is deployed)

Apple master computer running OS X 10.7+ (with all necessary software, updates, files, and settings preconfigured.

Not to mention that when used with NetInstall and Apple Remote Desktop (ARD), all deployments may be executed over the LAN without the need for booting to external media or manual intervention whatsoever.Д«efore going into the step-by-step process, there are a few requirements. NetRestore provides native support for creating an OS X Server-ready, deployable image that encompasses all the software, files, and settings required for the computers in use at your organization to be setup correctly each time.